LMCH-HA-6 Standard Series Lifting Electromagnet for Handling Scraps
Product Features:
1.This series adopts a special design magnetic circuit which has large air space and magnetism density. It is made of aluminum wire and the coil protection plate is made of the rolled high Mn steel plate that has good performance of wear-resistance & heat-proof. It also has the characteristics of light weight, low power consumption, high lifting capacity and long serving life.
2.This series has fine insulation structure. The insulation treatments adopt the vacuum trying & glue filling, which has improved the electrical and mechanical performance of the coils. The insulation grade can reach class special C.
3. It generally adopts the control mode of constant voltage. It can further improve the lifting capacity if changing to adopt the control mode of over excitation.
4. With simple structure and reliability, it is suitable for working with all kinds of lifting equipments.
Strongly Promoted!
2005-07-01
LMCH-HA High-frequency Series Lifting Electromagnet for Handling Scraps
Product Features:
1.Duty cycle 75% with high operation frequency. The working efficiency and operation speed have greatly improved comparing with the standard series.
2.It adopts the control mode of strong excitation (DC-290V/DC-200V), which can improve the lifting capacity.
3.Large-sized electromagnet can adopt the control mode of over excitation (DC-350V/DC-290V/DC-200V), which can increase the current speed and play stronger lifting capacity.
Strongly Promoted!
2005-07-01
LMCH-HAS High-temperature Series Lifting Electromagnet for Handling Scraps
Product Features:
1. The coil is made of aluminum wire and qualified insulation materials. It has fine insulation structure so that the coil is not easy to be broken down.
2. The electromagnet adopts a special heat-resistance treatment so that it can handle scraps below 650℃.
2004-07-01
MW03 Series Lifting Electromagnet for Handling Steel billets and Slabs
Product Features:
1. The optimum magnetic circuit is designed according to that billets have the characteristic of big magnetic conductivity. which is of small power consumption, light weight large lifting capacity and reliable operation.
2.The coil is made of aluminum wire which has fine performance of heat-resistance. The insulation treatments adopt the vacuum trying & glue filling, which has improved the electrical and mechanical performance of the coils. The insulation grade can reach class C. So this series can wear well under high temperature and worse working conditions.
2005-07-01
MW73 Series Lifting Electromagnet for Lifting, Transporting and Turning slabs
Product Features:
1.The special magnetic circuit is specially designed for turning the slabs and can assure accurate and easy turning operations.
2.When using the crane with guided post, it can turn the slabs of 180° during transporting.
This series has functions of both transporting and turning and is best adopted in the operations of inspecting & arranging the up and under sides of slabs. The turning operation is very efficient and safe.
2005-07-01
MW22 Series Lifting Electromagnet for Handling Blooms, Steel bars and Rounds
Product Features:
This series is suitable for handling large-sized ingots and blooms. It can generate deep magnetism penetration in narrow attraction0 area and no need to adjust the attraction force according to the transformation and distortion conditions of the lifted materials. It also can lift steel materials under the condition that there is air space. It can generate strong magnetic force and safely lift up the materials of various lengths. By using double-lay transverse of horizontal type, the steel materials of heavy distortion can also be carried out by reliable turning operation.
Note: To select the appropriate control equipment and other auxiliary equipments should be based on the sum consumption power(current) of all magnets in combination use.
2004-07-01
MW22 Series Lifting Electromagnet for Handling '工' and 'H' Steel
Product Features:
This series is mainly used to lifting and transporting “工” & “H”
2005-07-01
MW22 Series Lifting Electromagnet for Handling wire rod (rod coils)
Product Features:
When lifting and transporting, there is no need to use steel wire or C type hook. The rod coil only occupies a very small area and has high empty-occupied rate, which makes it not easy to destroy the rod coil. The specially designed magnetic circuit is suitable for rod coils of various diameters and the selection of magnet model depends on the length. If the electromagnet is long enough, it can handle several pieces of rod coils in the length direction, but the coils' arrayed length should be within the length of the magnet.
2009-07-01
MW12 Series Lifting Electromagnet for Handling Steel Billets and Rounds of strong Magnetise Penetration
Product Features:
The specially designed magnetic circuit makes it be able to penetrate the air space of multi-layers and has enough attraction force towards the second-layer. It can handle unbundled billets or double-layer billets as well as large-sized ingots, ingot modules and bundled screw-thread steel.
2005-07-01
MW92 Series Lifting Electromagnet for Handling Small Billets and Ingots
Product Features:
This series has installed inside moveable magnetic blocks which can freely stretch or draw when attracting the steel materials. It also can automatically adjust the contact area with the attracted material and then obtain the biggest contact area. It is suitable for lifting and transport multi-pieces of blooms, pipe billets with various lengths and cast ingots of cross arrayed.
2009-07-01
MW15, MW42 Series Lifting Electromagnet
Product Features:
It can generate deep magnetism penetration in narrow attraction area and can lift steel materials under the condition that there is air space. This series is of high attraction force type. Series MW42 mainly are used in lifting and transporting high temperature square billet heavy track below 650, and Series MW15 are suitable for lifting and transporting coiled stock(bundle screw-thread steel).
2009-07-01
MW16, MW26, MW36, MW96 Series Lifting Electromagnet
Product Features:
These series magnets are of quincuncial type and have movable magnetic poles, which are suitable for lifting and transporting roiled strips. They have three types of structures:
1.Vertical handling type. Electromagnet absorbs the edge surface of the roiled strip. When the edge surface (shown as B) is convex, concave or orographical and the height difference δ is more than 25mm, by adopting vertical handling the electromagnet can well contact with the edge surface and fully play its lifting capacity as the magnetic poles can move up and down freely. (MW26, MW36 Series)
2.Horizontal handling type. Electromagnet adsorbs the arcuate side-face of the roiled strip. (MW16 Series)
3.General handling type, which can do both vertical and horizontal handling. (MW96 Series)
2009-07-01